A robot joint controller is a type of feedback control system which is an old and well understood technique. We will learn how to assemble the various mechatronic components such as motors, gearboxes, sensors, electronics and embedded computing in a feedback configuration to implement a robot joint controller.
Search Results for: micro controller
A number of strategies exist to reduce the effect of these coupling torques between the joints, from introducing a gearbox between the motor and the joint, to advanced feedforward strategies.
We start by considering the effect of gravity acting on a robot arm, and how the torque exerted will disturb the position of the robot controller leading to a steady state error. Then we discuss a number of strategies to reduce this error.
A robot joint is a mechatronic system comprising motors, sensors, electronics and embedded computing that implements a feedback control system.
We recap the important points from this masterclass.
We will learn about how we make the the robot joints move to the angles or positions that are required in order to achieve the desired end-effector motion. This is the job of the robot’s joint controller and in this lecture we will learn how this works. This journey will take us in to the […]
We use MATLAB and some Toolbox functions to create a robot controller that moves a camera so the image matches what we want it to look like. We call this an image-based visual servoing system.
We will introduce resolved-rate motion control which is a classical Jacobian-based scheme for moving the end-effector at a specified velocity without having to compute inverse kinematics.
We will use Simulink to create a dynamic model of a single robot joint and simulate its operation.
Building a highly accurate robot is not trivial yet we can perform fine positioning tasks like threading a needle using hand-eye coordination. For a robot we call this visual servoing.